RC helicopter header

click here to one35th main index

The links to other web sites are provided as a service to the modeling community only and DO NOT represent endorsement or recommendation of any information, company, product or service. one35th is not responsible for the validity of information on linked sites.

60 series X-cell go-button.gif (237 bytes) 60 series Long Ranger go-button.gif (237 bytes) 60 series Spec go-button.gif (237 bytes) RC Heli main go-button.gif (237 bytes)
Technical Data - 60 series  :
Overall length : 1346 mm
Overall height : 412 mm
Main rotor diameter : 1455 mm
Tail rotor diameter : 302 mm
Gear ratio : 9.0 : 1 : 4.37
Collective pitch range : 20° pitch change
Flying weight :
(Radio, 5 servos,gyro,1200m.a. battery,muffler)
3.90 kg
Engine requirement : 10.0 ccm ( 60 cu.in)
Engine : WEBRA  SP .61 (Ring) with side exhaust
Caburetor : WEBRA - PROMIX
Radio requirement : minimum 5 channels heli-radio with 5 servos ( Gyro recommended)
Fuselage type : Fiber glass, wood, metal, carbon fiber
Tail drive type : Torque Tube Drive kit
Radio : Futaba PCM - FP-6NHP
Transmitter : FP-T6NHP
Receiver : FP-R116GP
Servo : S130
Battery : NR-4J
Switch : SSW-J
Gyrosensor : Futaba FP-G3BB

 

60 series X-cell go-button.gif (237 bytes) 60 series Long Ranger go-button.gif (237 bytes) 60 series Spec go-button.gif (237 bytes) RC Heli main go-button.gif (237 bytes)
B_email.jpg (2667 bytes)

Created by one35th -  Last updated on  :  Friday, April 09, 2004