|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
Eisenbahnverlastung für Gerät 040 - 60cm ( 1/35 scale ) by CMK - Code RA005 |
|
|
|
 Loading and unloading of Mörser |
 Wagon's marking |
| Instruction manual - Eisenbahnverlastung für Gerät 040 - 60cm | |
 Assembly manual Page 1 Introduction - Painting |
 Assembly manual Page 2 Parts list - step 8, 9 and 10 |
 Assembly manual Page 3 Step 2, 3, 4 and 5 |
 Assembly manual Page 4 Colors - Step 1, 6 and 7 |
Parts Package - Eisenbahnverlastung für Gerät 040 - 60cm |
||
The transport carriages, they are
molded in the same way as the
rest of the kits. The very soft resin, comes in two colors, gray and yellow. Parts are
carefully conditioned in small plastic bags, and one can see that maximum precautions have
been taken to protect the smaller parts. However, some of them broken, but nothing
serious. The lack of references on the subject made the start of kits straight from the
box. carefully follow the instruction leaflet and clean thoroughly the parts before any
gluing. The smaller parts, about a hundred, will require a very long and painful cleaning,
so a lot of patience will be needed. The wheels are amongst the most difficult parts to
clean, as there are enormous sprues attached to them. Building stages, were eventually
carried out and the two wagons were built. All the processes were then repeated again on
the arms. Everything has been planned to get correct fit, and after several trials, and
adjustments the Mörser was fixed. The ensemble now stable and strong. |
||
 |
 |
|
 |
 |
 |
|
Created by One35th - Are you arrive at this page through a link from
another site or search engine ? |
|
